10 Steps to Fix the D-Link Wireless Network Problems

10 Steps to Fix the D-Link Wireless Network Problems

The D-Link wireless router offers you the ability to connect your computer to the same high-speed modem that allows other Internet-capable devices to access the websites and share files over the web. However, due to various factors, you may get the low signal strength on your computer at times. On that condition, you should either consult the Internet Service Provider or address problems with the Dlink Customer Support experts to get immediate solutions.

Also, there are a variety of troubleshooting options that can fix issues typically caused by the outdated drivers and the physical interference. Here’s how to speed up the D-Link wireless network:

Step 1 – Sometimes, Bluetooth devices or cordless phones can cause interference with the wireless signals and slow down the network speed. So, disconnect or turn off these devices currently enable near the Wi-Fi network. You can also change the router channel to get rid of conflicts between devices.

Step 2 – Make sure that you have placed the router an enclosed space like the cabinet. Always try to set your D-Link router in a centralized position closer to the system and check if it improves your wireless network connection.

Step 3 – If the issue still exists, locate the small reset hole placed on the back of your router. Press down the reset button by inserting a paper clip into the reset hole. Hold the clip for 10 seconds, and you see that all of the settings have been erased. This action will reset your D-Link router to the factory settings.

Step 4 – Navigate to the IP address ‘192.168.0.1’ in the browser’s address bar and got to the router’s setup page. Input the ‘admin’ for the username text field and click the ‘OK’ button. Remain the Password text field blank.

Step 5 – Click the icon labeled as ‘Setup Wizard,’ followed by the ‘Launch Internet Connection Setup Wizard’ button. Select the ‘Next’ option and input a new password in the text field. Click the ‘Next’ button.

Step 6 – Continue with the instructions on the screen to choose the correct time zone and the Internet connection type. Click the ‘Next,’ and then the ‘OK’ button. Visit the D-Link’s official web page.

Step 7 – Click the ‘See All Products’ button and choose the option for the model of your wireless router. Click the ‘Support Resources’ link, and then the ‘Firmware’ option. Click the link reads like ‘Download Now’ next to the updated version of firmware.

Step 8 – Go back to the D-Link router’s setup page by navigating to the ‘192.168.0.1’ IP address. Input the ‘admin’ into the username and the newly created password in the ‘Password’ text field. Click the ‘OK’ button.

Step 9 – Click the ‘Tools’ tab, and then the ‘Firmware’ icon. Click the ‘Browse’ button and select the firmware file name you just downloaded. Select the ‘Open’ option. Click the ‘Save Settings’ button to update the firmware for your wireless router.

Step 10 – Right-click on the Network icon placed in the lower right corner of the system screen and choose your D-Link router’s name to access the Internet.

Now, you can open your browser and search something to check if it improves the Internet speed. However, if the obstacle still persists, you can look for other solutions. Contacting the D-link Customer Care number, you can seek the instant help and suggestions to fix the network issues. You can also check if you want Guide to Set Up Your D-Link Cloud Router Quickly.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Leave a Reply

Your email address will not be published. Required fields are marked *