8 Steps to Configure your TRENDnet TEW 652BRP Router

8 Steps to Configure your TRENDnet TEW 652BRP Router

A wireless router is the best solution to access the Internet on multiple devices simultaneously within a specific range of wireless signals. Nowadays, there are different brands of wireless routers available in the market, and TRENDnet TEW 652BRP router is one of them that can provide the constant access to the Internet on your computer without making the wired connection. For any concerns or queries, you can talk to the experts by dialing the TRENDnet support number.

Step-by-Step Directions to Install a TRENDnet TEW 652BRP Router:

The process of installing TRENDnet TEW 652BRP is relatively simple, and the following instructions may take a few steps. To connect your router correctly, you can follow the step-by-step guide given below.

Step 1 – First of all, you need to attach the 2dBi removable antenna to your router. Plug the RJ-45 wire into one of the LAN ports of your router and the other end of the cord to the Ethernet port on your computer.

Step 2 – Use another RJ-45 cord to make a connection between your TEW-652BRP router and the modem. Keep in mind that you should insert the cable into the WAN port on the back of your router.

Step 3 – Attach an AC electrical adapter to your router and then to the electric switch. Don’t forget to turn on your TEW-652BRP router. Open your favorite web browser on your computer and navigate to the http://192.168.10.1 IP address to log into your router.

Step 4 – Input the username and password in the appropriate text fields. If you have not changed the login details, it would be the default one and you need to enter ‘admin’ for both username and password.

Step 5 – Click the Wizard if it doesn’t appear automatically. Click the ‘Next’ button. Here, you can create your new password. After changing the password, click the ‘Next.’

Step 6- Choose the Time Zone, and then click the ‘Next,’ followed by the ‘Next’ again. Choose the Internet connection type and then click ‘Next.’

Step 7 – Generate a Dynamic IP address and click ‘Next.’ Later on, you have to choose the wireless LAN connection, and then click the ‘Next’ button.

Step 8- After you complete the process, a ‘Setup Complete’ dialog window appears. Now, you have to click the ‘Restart’ button to start your computer again and apply the configuration.

After restarting the computer, you can connect your device to the Internet through TEW-652BRP router. If there is an issue in accessing the Internet or the speed is too slow, then it is likely that you have misconfigured your router. On the occasion of these difficulties, you can consult the IT professionals by merely dialing the TRENDnet Router support number and get all problems fixed within the shortest time.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Leave a Reply

Your email address will not be published. Required fields are marked *